U/B and U/MB Vapor Control Gauging Stations
U/B Valve is shown above, left. Above, center: Closed Trimode installed in U/MB Valve. Above, right: U/MB. Also see U/MB variation sheet for enlarged view.
The MMC U/B type vapor control valve is custom designed to fit directly into existing ullage ports and operates via a 2-inch full-bore ball valve to assure positive closure. It combines the simplicity of installation of the U valve, requiring no hot work, with the positive shutoff of the B valve. U/B and U/MB valves are designed to measure 500mm (19.69″) above zero. Half liter sampling is available.
Below: Typical Dimensions Required for U/B Type Vapor Valve
Print out this form to your printer, complete it with the
appropriate dimensions and fax to MMC at 516-371-3134
60 Inip Drive, Inwood, New York 11096-0664