NAVIGATION

Home Page

Full Product Listing

Sales and Service Locations

Company Background

New Product
"Closed" gauging for chemical and refined product carriers

MMC Logo 2 spec sheet slug
021-3r
Version 01
MMC International Corporation
60 Inip Drive, Inwood, New York 11096-0664
Phone: 800-645-7339 Fax: 516-371-3134 mmcinwd@aol.com


PRODUCT SPECIFICATION SHEET

Oil-Water Clarifier-Coalescers

for Removal of Water and Particulate Solids from
Lube Oil and Other Hydrocarbon Fluids

discontinued

Lubricating oil is inherently hydroscopic--or naturally prone to the absorption of moisture. It will eventually absorb the same amount of relative humidity as the surrounding free air. Ordinarily, oil and water will also separate except in turbulence or in an emulsified state. And this is the water that MMC Clarifier-Coalescers are designed to remove.

In a single pass, these systems will extract over 99% of the free water present in the lubricating oil. Water and solid contaminants are eliminated via inexpensive and easily replaceable cartridge-type elements. Each of these units is designed to operate most efficiently at oil temperatures between 120° F and 150° F. (Below 120° F a heating element may be required.)

In addition to processing lubricating oil, the Lube Oil Clarifier-Coalescers can also be used on other hydrocarbons such as hydraulic fluid, jet fuel and vegetable oil that must be cleared of solid contaminants and free water.


SPECIFICATIONS

1. MODEL D-1128 5 GPM CAPACITY
Motor: 1/2 hp, 220-440V, 60HZ, 3ø, 1725 rpm.
Pump: gear type - 5 gpm, 60 psi relief valve setting.
Size: 60" high X 21" wide (1524 X 533.4mm).
Filter: 7 required, each with 5.5 sq. ft. of filter area.
Water Screens: 7 required - stainless steel mesh.
Oil Inlet: 3/4" npt (19.1mm).
Oil Outlet: 1" npt (25.4mm).
Net Weight: 340 lbs. (154.2 kg).

2. MODEL D-1254 3/4 GPM CAPACITY
Motor: 1/2 hp, 115V, 60HZ, 1ø, 1725 rpm.
Pump: gear type - 3/4 gpm, 60 psi relief valve setting.
Size: 36" high X 21" wide (914.4 X 533.4mm).
Filter: 2 required, each with 5.5 sq. ft. of filter area.
Water Screens: 1 required - stainless steel mesh.
Oil Inlet: 1/2" npt (12.7mm).
Oil Outlet: 1/2" npt (12.7mm).
Net Weight: 180 lbs. (81.6 kg).

3. MODEL D-1383 3/4 GPM CAPACITY WITH HEATER
(Stern Tube Lube Oil Clarifier-Coalescer)
Motor: 1/2 hp, 440V, 60HZ, 3ø, 1725 rpm.
Pump: gear type - 3/4 gpm, 50 psi relief valve setting.
Size: 36" high X 31" wide (914.4 X 787.4mm).
Filter: 2 required, each with 5.5 sq. ft. of filter area.
Water Screens: 1 required - stainless steel mesh.
Oil Inlet: 1/2" npt (12.7mm).
Oil Outlet: 1/2" npt (12.7mm).
Heater: 4.5 Kw - 120° F to 190° F, 440V, 3ø.
Safety Controls:
  • 1 adjustable thermostatic recycling-type switch.
  • 1 fixed temperature cut-out switch.
  • 1 oil flow heater cut-out switch.
Net Weight: 314 lbs. (142.4 kg).

4. MODEL D-2525-1 3/4 GPM CAPACITY WITH HEATER
(Stern Tube Lube Oil Clarifier-Coalescer)
Motor: 1/2 hp, 440V, 60HZ, 3ø, 1725 rpm.
Pump: gear type - 3/4 gpm, 50 psi relief valve setting.
Size: 36" high X 31" wide (914.4 X 787.4mm).
Filter: 2 required, each with 5.5 sq. ft. of filter area.
Water Screens: 1 required - stainless steel mesh.
Oil Inlet: 1/2" npt (12.7mm).
Oil Outlet: 1/2" npt (12.7mm).
Heater: 4.5 Kw - 120° F to 190° F, 440V, 3ø.
Safety Controls:
  • 1 adjustable thermostatic recycling-type switch.
  • 1 fixed temperature cut-out switch.
  • 1 oil flow heater cut-out switch.
High Water Level: local and remote indicator.
Change Elements: local and remote indicator.
Control Box: combined system electrical control box includes motor and pump, contactors, adjustable thermostat, circuit controls and fuses.
Approvals: U.S.C.G. and ABS on a per ship basis.
Net Weight: 400 lbs. (182 kg).


© 1996-2017 MMC International Corporation
mmcinwd@aol.com